Frequently Asked Questions

Before storing your RV, do a thorough winterization to protect the plumbing from freezing temperatures. This includes draining all water tanks and lines, adding RV antifreeze to the system, and inspecting for leaks. Disconnect the battery, cover the tires, and check the seals on the windows and doors. A clean, dry, well-ventilated area is ideal for storage to prevent mold and mildew.

If your RV water heater isn’t heating, check that the propane tank has fuel and that the gas valve is open. For electric heaters, make sure the power source is connected and that the circuit breaker hasn’t tripped. Ensure the bypass valve isn’t accidentally set to bypass mode, which would prevent hot water from entering the lines. Finally, inspect the heating element for signs of wear or the thermostat for possible replacement.

If your RV furnace isn’t blowing hot air, check your propane supply and make sure the propane valve is open. Clean the air intake and exhaust vents for blockages, which can restrict airflow. Ensure the battery charge is adequate to power the blower motor. For electrical systems, check that the fuse for the furnace hasn’t blown. If the problem persists, the thermostat or ignition control may need repair or replacement.

Low water pressure could be due to several issues. First, check if the campground water source is causing the issue by testing another faucet or spigot. If only the RV has low pressure, inspect your water filter, which could be clogged, and clean or replace it if necessary. Check the pressure regulator to ensure it’s not restricting too much flow, and verify that the water pump is operating correctly if you’re not connected to city water.

RV black tank sensors can get clogged or covered in residue, causing them to read full even when the tank isn’t. Use a black tank cleaner to help break down any waste. Afterward, take your RV for a short drive to let the mixture slosh around. Empty and flush the tank thoroughly to see if the sensor resets. If not, consider a professional cleaning or replacement of the sensor.

If your generator won’t start, check the fuel level and ensure it has oil, as low oil levels will prevent it from running. Inspect the battery to make sure it’s charged and the connections are secure. Also, check the air filter and fuel lines for clogs, and make sure you’re following the manufacturer’s start-up procedure. If it still doesn’t start, the carburetor could be dirty or the spark plug may need replacement.